ADD APT Foamstop WE 10 Blend of mineral oils glycol’s and surface-active components ADD APT Defoamer / Antifoaming agent >> Silicone-free >> Mineral oil Acrylic/Acrylate Resins Vinyl Coatings >> Solventborne Miscible in water Soluble in mineral oil ADD APT Foamstop WE 10 is a highly effective Foam Control Agent for low VOC-Emulsion systems based on PVAC, Styrene/Acrylics or pure Acrylics. It is a proprietary blend of mineral oils glycol’s with surface-active components. Paint industry 0.25 to 0.75 % wt. (Flexo-) Printing Inks ADD APT ® Foamstop WE 10 is recommended for the use in pigmented low VOC-Emulsion paints, (Flexo-) Printing Inks as well as clear lacquers and also for Emulsion based Adhesives ADD APT ® Foamstop WE 10 is easy emulsifiable. 2/3 of the amount should be added during the grinding stage, 1/3 during the ‘let down’ stage Very suitable for cost effective, high PVC emulsion paints Maintains the defoaming properties over a prolonged period of time Effective over a wide pH range (4 to 10) No intercoat adhesion problems expected when the defoamer is applied. Highly effective, easy emulsifiable, foam control agent. Used for low VOC-emulsion systems based on PVAC, styrene/acrylics and pure acrylics, pigmented low VOC-emulsion paints, (flexo-) printing inks, clear lacquers and high PVC emulsion paints. Maintains defoaming properties over a prolonged period of time. Offers effectiveness over a wide pH range. Gives no intercoat adhesion. <br> Use level: 0.25-0.75 %wt.