ADD APT UV-Link SA 01 Styrene/acrylic copolymer ADD APT Acrylic Resins Coatings >> UV / Radiation Curing ADD APT UV-Link SA 01 is a low viscosity UV-curable Styrene/Acrylic emulsion, designed for Crack Bridging (CB) systems. It is a Styrene/Acrylic copolymer emulsion containing an UV-curable additive Crack Bridging Exterior Wall paints, max. PVC: 40%; starting formulation Crack Bridging Roof Coatings Textured Masonry Coatings The emulsion is stable to the addition of pigments and coalescing solvents and may be made more thixotropic by the incorporation of a suitable gelling agent The polymer has elastomeric properties and excellent resistance to water and alkalis. Due to its crosslinking ability under UV/daylight, it will avoid the so undesirable dirt pick-up characteristics associated with low Tg polymers i.e. it shows low dirt pick-up In (CB) systems it shows very good performance with regards to dynamic and static cracks which could occur in new or renovated concrete buildings or other structure. It is a cost effective alternative to pure Acrylic based CB systems and designed for areas where the AFNOR norms P8440-1,-2,-3,-4 are not required. It shows very good Elongation and Tensile Strength even at severe circumstances like subfreezing temperatures (> -10 °C). Low viscosity, UV-curable, styrene/acrylic copolymer emulsion. Contains an UV-curable additive. Used in crack bridging systems such as exterior wall paints and roof coatings and in textured masonry coatings. Offers stability to addition of pigments and coalescing solvents, elastomeric properties, very good resistance to water and alkalis, crosslinking ability under UV/daylight and low dirt pick-up. Provides very good elongation and tensile strength even at severe circumstances like subfreezing temperatures (> -10 °C).