CN 120E50 Epoxy Acrylate Atofina-Sartomer North America South and Central America Epoxy Resins >> Acrylate Epoxy Resins >> Bisphenol A based Inks Coatings INKS >> Gravure Architectural / Decorative >> Flooring INKS >> Lithographic and Offset Inks Wood & Furniture Coatings Plastic coating Metal INKS >> Flexographic inks Other industry >> Glass Coating Other industry >> Paper coatings CN-120E50 is a difunctional bisphenol A based epoxy acrylate blended with 50% SR-454, ethoxylated (3) trimethylol propane triacrylate. It provides a good balance of water properties and high reactivity. CN-120 offers the lowest viscosity of Sartomer's bisphenol A based epoxy acrylates. It is used in adhesives, anaerobic, adhesives, binder, adhesives, pressure sensitive, adhesives, structural, coatings, floor, coatings, glass, coatings, optical, coatings, plastic, coatings, wood, electronics, inks, flexo & gravure and offset inks. It possesses good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Difunctional bisphenol A based epoxy acrylate blended with ethoxylated (3) trimethylol propane triacrylate. Used in glass, optical, metal, plastic, wood, and flexo & gravure and offset inks. Provides a good balance of water properties and high reactivity. Offers low viscosity. Exhibits good adhesion and good chemical resistance. Possesses good hardness, good water resistance and high abrasion resistance.