Bayowet FT 229 Polyether-modified non-ionic fluorinated surfactant Bayer-Börchers Adhesion promoter / Bonding agent Wetting agent/ Wet edge enhancer >> Surfactant Acrylic/Acrylate Resins Polyester Coatings >> Waterborne water Bayowet® FT 229 8 Polyether-modified, non-ionic fluorinated surfactant, 30% in water Description Additive to improve adhesion of water-based paints. Solubility aliphatic hydrocarbons insoluble alcohols soluble esters soluble ketones soluble Properties The paint additive Bayowet® FT 229 significantly enhances adhesion of water-based paint systems. lt also improves wetting of difficult and contaminated substrates. Applications The paint additive Bayowet® FT 229 possesses good binder compatibility and high efficiency in many binders. lt is particularly suited to use in chemically hardening systems, e.g. polyester isocyanate or acrylic isocyanate systems. glycol ethers soluble glycol ether acetates soluble water soluble Addition rate Recommended addition rates are 0.03 to 0.1 % active substance, relative to total volume. The exact amount must be determined before large-scale use as both too large and too small amounts may give rise to adverse effects. Recoatability Loss of adhesion between base and top coat or of recoatability is unlikely when used in small amounts. Negative effects e.g. caused by overbaking may be intensified, however. Polyether-modified, non-ionic fluorinated surfactant, 30% in water. Improves adhesion of water-based paints. Improves wetting of difficult and contaminated substrates. Possesses good binder compatibility and high efficiency in many binders. Suited to use in chemically hardening systems, e.g. polyester isocyanate or acrylic isocyanate systems. Loss of adhesion between base and top coat or of recoatability is unlikely when used in small amounts. Negative effects e.g. caused by overbaking may be intensified, however. Recommended usage level: 0.03 to 0.1 % active substance, relative to total volume.