Epalloy 7190A83 Modified bisphenol A resin blend CVC Epoxy Resins >> Bisphenol A based Coatings >> Solvent-Free/ High-Solids Architectural / Decorative >> Flooring EPALLOY 7190A83 is a non-BGE based, low viscosity resin blend of Bisphenol A epoxy and the glycidyl ether of a branched alcohol. Unlike aromatic modified resins, 7190A83 exhibits a lower modulus and is an excellent choice where brittleness is a problem. It is compatible with all standard curatives and most resin systems and solvents, but will tend to cure slower than undiluted resin. EPALLOY 7190A83 is excellent for 100% solids floor coatings and trowelable floorings requiring room temperature cure. Unlike other diluted Bisphenol A based resin, EPALLOY 7190A83 will not crystallize and is much easier and safer to handle than BGE modified resins. It is especially well suited for interior applications where a low volatility resin, without objectionable odors, is required. It is used in epoxy grouts and crack injection, chemical resistant coatings, primary flooring resin for moderate traffic areas, 100% solids general purpose epoxy coating. Resin blend of Bisphenol A epoxy and the glycidyl ether of a branched alcohol. Exhibits lower modulus and is an excellent choice where brittleness is a problem. Used in epoxy grouts and crack injection, chemical resistant coatings, primary flooring resin for moderate traffic areas, 100% solids general purpose epoxy coating.