Epalloy 7192 Diglycidyl ether of Bisphenol A 25036-25-3 CVC Epoxy Resins >> Bisphenol A based Coatings >> Solvent-Free/ High-Solids EPALLOY 7192 is an unmodified, high molecular weight Bisphenol A based epoxy resin that is a semi-solid material at room temperature. It is particularly well suited for use in formulating durable high solids coatings, toughened adhesives, laminating resins, and prepreg molding compounds. As compared to lower molecular weight epoxy resins it will provide faster cure, improved adhesion, more durable cured systems and toughness, with somewhat reduced high temperature performance. EPALLOY 7192 is suitable for blending with most other epoxy resins but may not be compatible with all modifiers or additives. It will react with most standard curing agents such as aliphatic and cycloaliphatic amines, amine adducts, polyamides, and amidoamines. Certain curing agents will require a short induction time after mixing and before application in order to allow compatibilization and to prevent surface defects such as blushing in coatings. It is recommended that EPALLOY 7192 be heated to a temperature of approximately 150°F to facilitate handling, dispensing and mixing. It is used in high solids primer and coatings, adhesives, chemical resistant coatings, tooling, molding and casting compounds, laminating, concrete dikes. Unmodified Bisphenol A based epoxy resin. Provides faster cure, improved adhesion, more durable cured systems and toughness, with somewhat reduced high temperature performance. Used in high solids primers and chemical resistant coatings.