Epalloy 8240 Epoxy phenol novolac resin 28064-14-4 CVC Epoxy Resins >> Phenol & Cresol (Novolacs) Coatings >> Solvent-Free/ High-Solids EPALLOY ® 8240 Low Viscosity Epoxy Phenol Novolac Resin EPALLOY 8240 is a very low viscosity epoxy phenol no-volac resin with low hydrolyzable chloride content and a high degree of reactivity. It is non-crystallizing and compatible with all standard curatives and most resin sys-tems and solvents. Formulations based on EPALLOY 8240 exhibit outstanding chemical resistance. 8240 is recom-mended for use in room temperature cure, 100% solids coatings and trowelable flooring formulations. Improve-ments in resistance to concentrated acids and aggressive solvents will occur. 8240's exceptionally low hydrolyzable chlorides make it the preferred material for electronic en-capsulants and laminates where higher temperature resis-tance is required. Blends of EPALLOY 8240 with standard epoxidized Bisphenol A based resins are an excellent way to impart resistance to crystallization. These blends will exhibit supe-rior cured properties compared to conventional diluted DGEBA resins. Viscosity Modifier for Epoxy Novolacs Non-crystallizing, very low viscosity epoxy phenol novolac resin. Used in room temperature cure, 100% solids coatings. Provides low hydrolyzable chloride content, high degree of reactivity, outstanding chemical resistance and compatibility with all standard curatives, most resin systems and solvents. Can be used as a viscosity modifier for epoxy novolacs and bisphenol A resins.