Irgacor 1930 Zirconium complex with 4-Methyl-g-oxo-benzene-butanoic acid 159793-35-8 Ciba Corrosion inhibitor >> Flash-rust inhibitors Corrosion inhibitor >> Long-Term Corrosion Protection Acrylic/Acrylate Resins Alkyd Resins Amino Resins Epoxy Resins Polyurethane Coatings >> Waterborne Architectural / Decorative General Industrial /Maintenance *HQHUDO IRGACOR 1930 is an organic corrosion inhibitor specifically designed for use in water based industrial and decorative coatings to give long term corrosion protection to ferrous surfaces. IRGACOR 1930 is recommended for use in water based primers and direct to metal monocoat systems. Suitable formulations may be based on: · acrylics and copolymers · epoxyacrylates · 2-pack epoxy / polyamine or amides · alkyd emulsions · 1- or 2-pack polyurethane emulsions The product offers the opportunity to formulate coating systems with superior corrosion resistance. Inorganic anticorrosive pigments such as zinc phosphates, modified zinc phosphates, barium metaborates etc. should be replaced by a combination of extender pigments/fillers (such as calcium carbonate) and IRGACOR 1930. Additional Formulation Recommendations The product is best incorporated into the coating formulation by grinding it together with the other millbase ingredients (e.g. as part of the pigment paste). In addition to long term corrosion protection, IRGACOR 1930 also efficiently protects against flash rust and along weld seam corrosion effects. The amount of IRGACOR 1930 required for optimum performance should be determined in trials covering a concentration range. Oic corrosion inhibitor specifically designed for use in water based industrial and decorative coatings to give long term corrosion protection to ferrous surfaces. Recommended for use in water based primers and direct to metal monocoat systems. Suitable for acrylics and copolymers, epoxyacrylates, 2-pack epoxy / polyamine or amides, alkyd emulsions, 1- or 2-pack polyurethane emulsions. Offers the opportunity to formulate coating systems with superior corrosion resistance. In combination with extender pigments/fillers (such as calcium carbonate), replaces inorganic pigments such as zinc phosphates, modified zinc phosphates, barium metaborate etc. Protects against flash rust and weld seam corrosion. Should be incorporated into the coating formulation by grinding it together with the other millbase ingredients (e.g. as part of the pigment paste). Recommended usage level: 1.0 - 3.0% of the total solids.