Barimite 200 Baryum sulfate Cimbar Filler >> Barium sulfate Coatings >> Solventborne Coatings >> Solvent-Free/ High-Solids Coatings >> Waterborne High Purity Barytes Baramite products are natural, off-white barytes produced in Cartersville, Georgia. Cimbar’s broad range of Barimite products are clean, high purity, high specific gravity, low solubility and chemically inert. These properties have made Barimite products the industry standard for consistent quality and performance in a wide range of end-use applications. Naturally occurring barium sulfate pigments, barytes, are useful in a variety of applications. They are chemically inert (e.g., acid resistant); they have a high density, and a low oil absorption; and they are radiopaque. Hence, they positively impact the performance properties of formulated products. Barimite products are buff colored because of their iron oxide content, and they represent a low cost alternative to blanc fixe and white barytes in applications where filler brightness is a secondary issue. Barytes pigments perform well in high solids, solvent and water borne applications. Like most mineral filler pigments, coarser products tend to be more inexpensive than finer products. Barimite 200 - is a 200 mesh filler that is used primarily in brake pads; sound deadening; high build coatings; and sealants where its larger topsize can be tolerated. Clean, natural, off-white baryte. Used in high build coatings. Offers high purity, high specific gravity, low solubility and chemical inertness. Performs well in high solids, solvent and water borne applications. Possesses high density and low oil absorption.