Cymel 323 Methylated melamine-formaldehyde resin Cytec Amino Resins >> Urea based (incl. UF) Coatings >> Solvent-Free/ High-Solids Coatings >> Waterborne Automotive OEM >> Primer / Surfacer Automotive OEM >> Top coats Automotive refinishing >> Clearcoat Automotive refinishing >> Enamels General Industrial /Maintenance Isobutanol Soluble in most alcohols, esters, ketones and glycol ethers Slightly soluble in aromatic solvents Insoluble in aliphatic solvents CYMEL 323 resin is a methylated melamine-formaldehyde resin with a high imino (-NH) content. Its outstanding performance characteristic is its exceptionally fast cure response. Fast, low temperature cure response Strong acid catalyst not required High solids Low formaldehyde emission High solids coatings Water-borne coatings Automotive topcoats and primers General industrial finishes CYMEL 323 resin is compatible with short and medium oil alkyd resins, polyester resins, acrylics, polyols and a number of epoxy and cellulosic resins. High solids, methylated melamine-formaldehyde resin. Used for high solids and water-borne coatings, automotive topcoats and primers and general industrial finishes. Offers a high imino (-NH) content and low formaldehyde emission. Provides fast, low temperature cure response. Does not require strong acid catalyst. Gives compatibility with short and medium oil alkyd resins, polyester resins, acrylics, polyols and a number of epoxy and cellulosic resins.