Cymel 5010 Alkylated benzoguanamine formaldehyde resin Cytec Amino Resins Coatings >> Solventborne Coatings >> Solvent-Free/ High-Solids Coil Coating n-Butanol/xylene Soluble in alcolhols, polyols, ketones, esters, glycol ethers, aromatic solvents and most other common solvents Insoluble in water CYMEL 5010 resin is a partially alkylated benzogua-namine formaldehyde resin designed primarily for solvent based systems. Its most significant advantage over the other amino resins in our product line is its superior water, corrosion, and chemical resistance properties. Fast Cure Response Strong Acid Catalyst Is Not Required Superior Water, Corrosion and Alkali resistance Properties Good Flow, Leveling, and Wetting Properties Good Heat Resistance Low Formaldehyde Release High Solids Coatings Appliance Finishes Container Coatings General Purpose Enamels Coil Coatings Primers It has good compatibility with most film formers, including short and medium oil alkyds, polyesters, acrylics, epoxies, and cellulosics. CYMEL 5010 resin will react with hydroxyl, amide, carboxyl and thiol functional polymers or resins. It not only crosslinks with the above functionalities, but also self condenses readily. Partially alkylated benzoguanamine formaldehyde resin. Used primarily for solvent based systems , high solids coatings, appliance finishes, container coatings, general purpose enamels, coil coatings and primers. Provides fast cure response, no strong acid catalyst requirement, very good water, corrosion and alkali resistance, good flow, leveling and wetting properties, good heat resistance and low formaldehyde release. Offers good compatibility with most film formers, including short and medium oil alkyds, polyesters, acrylics, epoxies, and cellulosics. Reacts with hydroxyl, amide, carboxyl and thiol functional polymers or resins.