Cymel UI-19-I Isobutoxymethyl methylol urea Cytec Crosslinking / Coupling / Curing Agents >> Amine Acrylic/Acrylate Resins Alkyd Resins Cellulosic Resins Polyester Vinyl Coatings >> Solventborne Wood & Furniture Coatings Isobutanol Viscous liquid 63% in isobutanol APPLICATION PROPERTIES In solvent borne systems CYMEL Ul-19-I resin is an isobutylated urea-formaldehyde crosslinking agent with a medium degree of alkylation, a medium methylol content and low imino functionality. CYMEL Ul-19-I resin is a very effective crosslinking agent for backbone polymers containing hydroxyl, amide and, to some extent, carboxyl functional groups such as alkyd/polyester or acrylic resins. CYMEL Ul-19-I resin is designed for use in fast curing wood coating systems, providing excellent stackability and very good chemical resistance properties. In water borne systems CYMEL Ul-19-I resin is insoluble in water and, because of its polymeric and hydrophobic nature, is not recommended in water borne systems. Catalysis In two-pack acid curing systems, strong acids like paratoluene sulphonic acid are recommended as the best catalysts. In one-pack acid curing finishes, weak acids with a pKa value higher than 1.9 are strongly recommended. Stability Formulated systems containing CYMEL Ul-19-I resin have to be stabilised with primary alcohols, amines or with a combination of these. Acid curing systems are usually stabilised only by addition of adequate amounts of primary alcohols. SOLUBILITY Alcohols Complete Ketones Complete Esters Complete Aromatic hydrocarbons Partial Aliphatic hydrocarbons Partial Water Not dilutable COMPATIBILITY Alkyd resins Very good Polyester resins Good Acrylic resins Good Nitrocellulose Very good Cellulose acetate butyrate Good Polyvinyl butyral Very good Viscous liquid 63% in isobutanol FDA STATUS CYMEL UI-19-I resin has FDA acceptance for food-contact use as directed in the following section of the Code of Federal Regulations: 21 CFR 175.300 (Resinous and polymeric coatings). Isobutylated urea-formaldehydecrosslinking agent with a medium degree of alkylation, a medium methylol content and low imino functionality. In solvent borne systems.Very effective crosslinking agent for backbone polymers containing hydroxyl, carboxyl or amide functional groups such as alkyd/polyester or acrylic resins. Designed for use in fast curing wood coating systems, providing excellent stackability and very good chemical resistance properties. Insoluble in water and, because of its polymeric and hydrophobic nature, is not recommended in water borne systems. In two-pack acid curing systems, strong acids like paratoluene sulphonic acid are recommended as the best catalysts. In one-pack acid curing finishes, weak acids with a pKa value higher than 1.9 are strongly recommended. Formulated systems containing it have to be stabilised with primary alcohols, amines or with a combination of these. Acid curing systems are usually stabilised only by addition of adequate amounts of primary alcohols. Complete solubility in ketones, esters, alcohols. Not dilutable in water. Partial solubility in aromatic hydrocarbons, aliphatic hydrocarbons. Very good compatibility with alkyd resins, polyester resins, acrylic resins, nitrocellulose, cellulose acetate butyrate, polyvinyl butyral.