K-Flex UD-350W Urethane diol King Industries Polyurethane (PU) - Polyols Coatings >> Solvent-Free/ High-Solids Coatings >> Waterborne Water K-Flex urethane diols are recommended modifiers for hydroxy or carboxy functional resins in combination with amino crosslinkers or isocyanate resins for high solids and waterborne systems. They are low molecular weight aliphatic diols which allow the incorporation of urethane functionality through hydroxyl end groups. The use of K-Flex urethane diols at modification levels of 2-10% can: Increase solids, reduce VOC's Increase film hardness Improve resistance properties In waterborne systems, K-Flex UD-320W/350W can be used to replace co-solvents and primary resins, resulting in lower costs and lower VOC's. They also make possible the incorporation of aliphatic urethane functionality, with all the properties associated with aliphatic urethanes, without the use of isocyanates. Additional benefits found in the modification of waterborne systems include: Improved abrasion, chemical, stain and QUV resistance Improved flow and leveling Improved gloss K-Flex UD-350W 88% Active Urethane Diol in Water Water soluble in absence of amine and co-solvent. Higher solids, improved flow, gloss, hardness and resistance properties. K-Flex UD-350W for optimum storage stability. Urethane diol. Used as a modifier for hydroxy or carboxy functional resins in combination with amino crosslinkers or isocyanate resins for high solids and waterborne systems. Offers high solids, improved flow, gloss, hardness and resistance properties. Gives optimum storage stability. <br> Use level: 2-10%.