Basically, dark-colored roofs absorb heat and increase cooling costs. By coating the roofs white (or paler color), a "cool roof" reflects heat away and keeps the building more comfortable. Cool roof coatings help roofs to last longer, increase the... (1 Member Reaction)

The goal of this research was to determine whether mid-infrared (MIR) or near-IR could be used to determine the consistency of materials supplied within and between vendors, and whether physical characterizations could be correlated to the variations...

Every year new people join the various businesses that use mixing machines in their laboratories and manufacturing facilities. What seems obvious to many experienced personnel can be complicated and frustrating to these newcomers. The purpose of this... (7 Member Reactions)

Human behavior has caused a great impact on the world; it has taken us time to understand the repercussions and the environmental accidents that have seriously compromised our own future. Chemical weapons, insecticides, fertilizers, industrial...

Microspheres are well known in the coatings industry for their use as low-surface-area fillers that offer benefits in viscosity and density control, solids content, application and flow characteristics. Cospheric LLC, a Santa Barbara-based...

For more than two decades, the "Spoonbridge and Cherry" sculpture in the Minneapolis Sculpture Garden near the Walker Art Center has been a symbol of the Twin Cities. In February, after more than 20 years of being perched atop a giant spoon, the...

These high performance properties are the result of using highly crosslinked polyurethane coatings, which can be derived from high-functional polyester resins (PES) or polyacrylate resins (PAC) and aliphatic polyisocyanates. Typical applications...

While the coatings industry has dedicated a great deal of research, wealth and commitment to developing environmentally acute products, the industry’s innovative formulations continue to be packaged in containers that create waste. In the stirring of...

Water is the number-one enemy of any structure, especially those made from concrete, natural stone or masonry. Penetrating water repellents have been a mainstay of the protective coating and sealant market for years due to their ability to protect...

Much of the commercial literature concerning UV measurement has been targeted to end users and addresses issues such as process monitoring, benchmarking and troubleshooting UV cure problems. However, another important audience for measurement are... (3 Member Reactions)

This paper discusses the different mechanisms to improve scratch and wear resistance of solvent and waterborne coatings by incorporation of nano oxide particles. Depending on the concentration of nano particles and their orientation in the coating... (3 Member Reactions)

To keep pace with modern-day mass production of consumer and luxury goods, the coatings industry has hastened to update technologies and deliver different kinds of coatings for various applications that hold up to corrosion, weathering effects and...

Since the first use of waterborne coatings, additives have been incorporated to enhance the properties of the final coating. These additives include co-solvents, pigments, preservatives, defoamers, rheology modifiers and others. One of the most... (3 Member Reactions)

Thickeners are not only responsible for the viscosity of a paint, but they also have a substantial influence on the smoothness and the thickness of the application layer, the leveling of the paint and the spatter resistance by brushing or rolling.... (2 Member Reactions)

Accelerated weathering of coatings for wood by QUV-A with direct water spray closely approximates natural weathering by simulating the erosion and cleaning typical for exterior coated wood, increasing the moisture content of the wood above what is...

Many modern processes, from food safety to materials preservation, involve the application of a coating to a substrate. These coatings serve to protect the substrate from damaging environmental effects, to protect substances in contact with the...

Coatings have been UV cured in industrial settings since the 1960s. The graphics industry was one of the first to adopt this technology, with a high-gloss coating on cards. Today, there are numerous industrial applications that utilize UV curing as...

Corrosion of metals and other substrates is and has been a major problem for industry. Special coating systems are used to limit the damage caused by corrosion and substrate protection can be achieved for a long period of time. This is especially... (1 Member Reaction)

High-performance materials such as solventborne coatings have been produced from polyurethanes for many years. However, with current regulatory pressures, a move to water systems and to materials from bio-based renewable resources is necessary....

Ultraviolet light (UV) and electron beam (EB) curable materials are unique solvent-free compositions that cure (harden) in a fraction of a second upon exposure to a UV or EB source. The absence of solvent eliminates the need for large baking ovens... (1 Member Reaction)

People have intentionally tested coatings for their resistance to environmental exposure for just over 100 years, and unintentionally since the dawn of mankind. Light-fastness and weatherability testing for color and appearance properties such as... (1 Member Reaction)

Uniform and consistent color is essential to achieve the impression of a high-quality finish and to avoid customer complaints. Special-effect coatings play a dominant role in automotive and other applications as they make an object "alive" and...

XPS (X-ray Photoelectron Spectroscopy) is a powerful method for the quantitative chemical characterization of thin films and solid surfaces. In this paper the XPS process and instrumentation will be described briefly, followed by examples that...

Nanoparticle dispersions as functional additives can be an interesting alternative to improve the performance of waterborne coatings. This paper illustrates that specifically processed ZnO nanoparticle dispersions called Oxylink™ can increase the... (3 Member Reactions)

Mixing, dosing and grinding are essential processes in paint and varnish production. In order to ensure a high level of automation, it is essential to be able to measure flows accurately and reliably. As some raw materials used in the manufacturing... (1 Member Reaction)

Carbon Motors Corporation is a homeland security company focused on a highly specific mission: developing, manufacturing, distributing and servicing the world's first purpose-built law enforcement patrol vehicle. The Carbon Motors 'E7' law...

Nanocomposites using organic polymers and inorganic nanoparticles will play an important role in applications requiring high visible transparence and mechanical flexibility. A unique class of materials is created when the elastic properties of...

One of the most overlooked sources of profit in a paint manufacturing organization is in the existing business processes. Much attention is spent on gaining new sales or adding new products and little energy is focused on existing business. While...

Polyurethane coatings are the technology of choice for performance, beauty and low-temperature cure characteristics in automotive exterior applications. Two-component polyurethane coatings are inherently self-healing due to their unique chemistry,... (2 Member Reactions)

Stained glass windows that are painted with gold purify the air when they are lit up by sunlight, a team of Queensland University of Technology experts have discovered. Associate Professor Zhu Huai Yong, from QUT's School of Physical and Chemical...

Founded in 1986, Incorez Ltd has rapidly gained prominence as a specialist manufacturer of oxazolidines, waterborne epoxy curing agents and waterborne polyurethane dispersions. These high performance materials are sold globally to producers of...

Energy prices have skyrocketed over the last several years, and the “green” movement is clearly in full swing. Energy is a precious global commodity, which some areas of the world are taking dramatic steps to conserve. In fact, several regulations...

Because of environmental concerns, aqueous polymer dispersions are important binding raw materials for plasters and coatings. Particles with phase-separated morphology, like core-shell copolymers, are responsible for unique and tailor-made mechanical... (1 Member Reaction)

In 2007, the United States paint market was approximately 1.50 billion gallons: 1.0 billion gallons was waterborne and 500 million gallons solventborne. The Architectural (Decorative) market is approximately 900 million gallons of this volume, and is...

The combination of silver or silver with isothiazoline gives a new and very effective preservative system. By using this combination, the amount of sensitizing isothiazoline can be significantly reduced and, if an excess of benzisothiazoline is used,...

Powder coating cured by ultraviolet light (UV powder) is a technology that combines the advantages of thermosetting powder coatings with those of liquid ultraviolet-cure coating technology. The difference from standard powder coatings is that melting...

Alpamine N41™ (or secondary-Butyl Ethanolamine sBEA for short) is among the latest alkyl alkanolamines developed for waterborne coatings. This molecule provides strong neutralising power, and its low volatility leads to very good pH and...

Mildew resistance of interior paints has become a topic of greater interest to paint companies in recent years. They are constantly evaluating their ‘new and improved’ formulations for various properties including hiding, staining, scrub resistance,... (2 Member Reactions)

There has been growing interest in new antimicrobial solutions in recent years, driven by a desire to provide longer-lasting protection in products that can be degraded by microbes, or to control or eliminate the undesirable effects created by the... (1 Member Reaction)

Architecture is the most vulnerable of all human art forms, and silicone systems are increasingly the dominant material for sensitive restoration of heritage landmarks. Thanks to their particular chemistry, versatility and the inventive dynamism of...

Most architectural coatings are applied on the job site, but that may change when it comes to building components produced from composites, vinyl and cement fiber. During the next few years, many manufacturers that produce decking, fencing, trim and...

It is said that glass flake was developed in the United States around 1959 and was used initially for the reinforcement of what was, at that time, new-technology roof-light panels made from a polyester resin. However, it was found that the panels... (1 Member Reaction)

There are several possible definitions of High-Performance Pigments (HPPs) but all of them go in the same direction. A high-performance pigment is one that: * demonstrates high-performance properties in its intended end use; * commands a premium... (1 Member Reaction)

Since discovering the photocatalytic properties of titanium dioxide, great expectations have been placed on this semiconducting material. A very promising application, besides effluent water purification, is air quality improvement by photocatalytic... (3 Member Reactions)

A new class of blocked sulfonic acid catalysts has been developed that promotes the crosslinking reaction of hydroxyl-functional polymers with amino-formaldehyde crosslinking agents such as hexamethoxymethyl melamine, especially in coil coatings.... (8 Member Reactions)

Gravure printing has continually lost share in the printing market since the 1950s. Alternate technologies and, more recently, environmental demands have pressured ink makers to find new applications, new technologies and better processes. And in the... (1 Member Reaction)

The cashew (Anacardium occidentale) tree is native to northeastern Brazil, where it is called by its Portuguese name Caju (the fruit) or Cajureiro (the tree). It is now widely grown in tropical climates for its cashew nuts and cashew apple.... (1 Member Reaction)

One of the major pollutants emitted by a surface coating is organic solvent used during processing and application. Hence, efforts have been made to develop alternative technologies that minimize the use of organic solvents in surface coatings. These...

For those involved in UV processes, UV measurement and process control is an important topic. Measurement answers critical questions like "How do we know whether a process is running properly?" "How do we troubleshoot problems with cure?" "How do we... (1 Member Reaction)

Because they are complex formulations of both organic and inorganic materials, coatings offer a special challenge to the analytical chemist. The high concentration of opaque materials that give paints their ability to cover a surface may also make...

A study conducted by the Battelle organization forecasts that antibacterial surfaces and germ-resistant coatings will be an important technological breakthrough in household products. Homeowners are looking for new cleansers that provide lasting... (1 Member Reaction)

With the current state of the economy, companies within the coatings industry are looking at every avenue to increase their cash flow and thus their bottom line. Countless companies in the industry have recognized the value in pursuing the Research...

Through the adoption of increasingly more stringent environmental regulations, the coatings industry has been moving away from traditional oil-based paint systems and toward water-based systems that contain lower levels of VOCs. From an applications...

UV-curable coatings are a boon to the paint industry, as they not only reduce VOCs but also speed up production processes and provide protective, durable and attractive finishes. UV-curable polyurethane acrylates have been synthesized from polyester... (1 Member Reaction)

The interest for hydroxyl-functional acrylic resins as a component in polyurethane coatings has increased not only because of improved performance through crosslinking, but also because of higher non-volatile content. Hydroxyl functionality may be...

Two-component (2K) polyurethane (PUR) soft-touch coatings have been used to coat plastics in the automotive industry for over a decade. Due to the inherent traits of polyurethanes, the coating formulations exhibit high scratch and abrasion resistance... (1 Member Reaction)

Organoclays have long been used as rheological modifiers for solvent and oil based systems requiring pigment suspension and other thixotropic properties associated with the paint and ink markets. The unique properties of organoclays give good...

Many thermoplastic polymers are semi-crystalline; that is, they consist of amorphous regions and crystalline regions. In the amorphous regions, the polymer chains exist in a random pattern; in the crystalline regions, the polymer chains are in a... (1 Member Reaction)

The standard coatings method for reading batch viscosity usually involves a Zahn or Efflux cup (Figure 1). This tried and true method involves testing for kinematic viscosity by dipping the cup into the batch and filling it with material. The user...

Polyurethane coatings are used today as architectural coatings, product finishes, automotive coatings and industrial maintenance coatings, making them among the most versatile coating types available.1Polyurethane topcoats were introduced to the...

Corrosion protection for industrial, industrial maintenance and marine markets can be an expensive and overwhelming task. Protecting objects such as oil platforms, bridges, storage tanks, steel structures, concrete walls and floors, and ship decks...

It is the duty of all responsible chemical companies to find ways to reduce their carbon footprint as much as possible. In many cases this is easier said than done, but when it comes to training staff there is a simple solution - online training. As...

Achieving oil and water repellency on surfaces is easily obtained with the use of fluoroalkyl-modified silanes. While perfluoroalkyl-modified silanes exhibit high static and advancing water and oil contact angles, their low receding contact angles...

Currently, the challenges faced by the coatings industry are not just to reduce costs and improve performance but also to fulfill strict legal requirements. The so-called "Eco-Friendly" anticorrosive coatings used to contain high or even 100% solids...

What do colors mean to us? Colors fulfill several important functions. Colors are identifiers. They help us communicate, organize ourselves at work or at home, or move around in traffic. Colors also alert us. Signal colors attract our attention to...

In 2007, environmentally conscious consumers turned to "green" products in every facet of their lives. Tips on "being green" and products to buy were everywhere - online, being reported on in broadcast news, incorporated into TV shows, and in...

Polyurethane powder coatings are known for excellent properties such as weathering resistance, superior flow characteristics, high flexibility and chemical resistance. The curing of polyurethane powder coatings proceeds by reaction between an...

In order to obtain glossy coatings with a high-quality appearance it is necessary that surface irregularities created during paint application or during drying/curing of the paint level out sufficiently, while sagging problems are avoided. In this...

Most phenolic resins1-4 are prepared by reacting formaldehyde with phenols, which are considered to be toxic and harmful for the environment. Now, with increasing concern for environmental protection and, due to stringent regulations to ensure the...

For a long time, I've kept a well-measured distance from all programs involving space and the military. Probably because I am horrible at remembering acronyms. For me AOL is where I logon to get my e-mail, but at Goddard it stands for Airborne...

wo trends are evident in architectural paints today. Waterborne, or latex, paints continue to grow in use, and today's homes are increasingly being painted with deep, vibrant colors, both inside and out. While experience has shown that the best...

Meeting the demands of your customer is always challenging. Meeting the requirements of a premium car company such as BMW can be overwhelming. But apparently no challenge is too big for automotive components supplier Plastic Onmium and its team of...

For more than 50 years, alkyd resins supplied in white spirit have been widely used in the production of high quality decorative coatings. Recently there has been a move towards lower aromatic solvents and higher solids paints which provide the end... (1 Member Reaction)

Uniform and consistent color is essential to achieve the impression of a high quality finish and to avoid customer complaints. Special effect coatings play a dominant role in automotive and other applications as they make an object "alive" and...

Recent advances in new amine functional curing agents have improved performance of waterborne two-package epoxy coating systems. These new amine adducts offer performance advancements along with the ability to meet low- and ultra-low VOC levels. This...

The exterior durability of most organic coatings is highly dependent upon the use of light stabilizers. The two main stabilizer categories are ultraviolet light absorbers (UVAs) and hindered amine light stabilizers (HALS). UVA chemical classes...

Graffito (graffiti, plural) is a word that is simple in meaning - any design, or scribbled motto, etc., drawn on a wall or other exposed surface.1 Yet its simple meaning belies the incredible expense and sheer nuisance associated with its practice in...

Most scientists become familiar with reading and writing technical documents such as research papers and reports at an early stage in their careers. Not so with patents, where skill in reading tends to come later in a career and after direct...

The first American Coatings Show and Conference was held from June 2-5 at the Charlotte Convention Center in North Carolina. According to event sponsors NPCA and Vincentz Network, this premier event was very successful. The event sponsors chose...

The need for antimicrobial products to protect water-based coatings against bacteria, yeast, fungus and algae is well established in the coatings industry. For exterior coatings, the market has responded with appropriate, cost-effective...

Dow Corning Corporation is a leader in developing new Silicon-Based Technologies (SBTs) that advance the coatings industry and empower formulators to offer new functionality in various applications. In the past 10 years, the number of new patents...

A good matte finish is often required in coatings formulations. In order to fully optimize this important parameter, Michelman has recently developed two wax dispersions: Michem® Guard 349 and Michem Guard 350. Both dispersions aid in imparting a...

Since the mid-1990s, composite materials have made substantial inroads across the building products industry in the manufacture of windows, doors, trim and siding. The unprecedented strength and resilience of these materials, and their low...

This article focuses on the chemistry of dirt pickup resistance (DPR) and outlines what steps - including research, product development and testing procedures - need to be taken to provide the proper solutions. Dow Coating Solutions has ad-dressed...

Polymertronics was set up in 2006 to develop technology to produce inkjet-printable, ultra-violet (UV) curable organic light-emitting diode (OLED) fluids. OLEDs that can be printed on standard UV-inkjet equipment have many advantages. They are much...

A few years ago the coatings world was ‘nano' crazy. The term nano was everywhere. I didn't know what it really meant since there wasn't an agreed-upon definition of nano. Mostly it meant adding a little of something tiny to paint. It didn't matter...

The UV ink market overall fared well in 2007, according to suppliers to the market. "We see the various segments of the energy cured ink market continuing to grow at a rate slightly greater than GDP in the both the EU and U.S. and at a generally...

The EU's REACH regulation has a clear message: meet the requirements or you will not be able to produce in, export to, or market within the EU. Is your company able to meet this challenge? The new European Union chemicals regulation came into force...

Printing on plastic is a growing and challenging market for UV-curable inks and coatings. They have been successfully used for many years, but new opportunities arise daily that remind printers and formulators how difficult achieving adhesion can...

Energy-curing inks are continuing to grow strongly in Europe, even though the graphics market as a whole is slowing down. The big challenge now facing the energy-curing sector is how to maintain the momentum. In Eastern Europe, sales of energy curing...

The major trends in the global coatings industry revolve around environmental concerns and the reduction of VOC emissions, reducing energy costs, improving productivity and improving performance. These four factors are driving companies across all... (1 Member Reaction)

Can you think of any organization that has had 35 consecutive years of sales growth? A few come to mind that may fit that category, but you can count them on one hand. Statistics from past RadTech International shows indicate that the UV/EB...

Petroleum sulfonates have evolved dramatically from their emergence as by-products of white mineral oil production to multifunctional products vital to modern industry and commerce. At the turn of the century, what we now call natural petroleum... (1 Member Reaction)

Phenalkamine curing agents, derived from the cashew nutshell liquid, provide outstanding anti-corrosion properties to epoxy coatings. The only way for a western company to maintain or possibly gain some market share is to be innovative, through...

Over the past few years, this series of technology reviews has dealt with many different aspects of coatings technology. Increasingly, it has become difficult to find subject areas of general interest which do not overlap extensively with something...

Every day within the United States new green initiatives are being proposed by politicians, celebrities and businesses. California governor Arnold Schwarzenegger is supporting hybrid cars. Musician Sheryl Crow is supporting green bathroom...

Dispersing pigments for paints and dyes increases the surface area of the product's ingredients by dispersing the solids or reducing their particle size. Advanced reactor-based technology can be used to achieve this. The principle works by using a...

Several pigment combinations are suitable for the formulation of green color shades. For economic reasons, "complementary pigment combinations" are often used. These are green shades that are generated by mixing yellow and blue pigments. However,...

Albert Einstein defined insanity as doing the same thing over and over again and expecting different results. In these times of spiraling energy costs and increasing environmental concerns, that definition might be stretched to include using the same...

It is not often that one can report on change of the scale that is taking place in Asia Pacific at the moment. Once in a lifetime events are shaping the global coatings industry as never before and it is not an easy task to try to do justice to the...

Colloidal microcrystalline cellulose (MCC) has been used widely in the food and pharmaceutical industries to suspend dense particles, prevent phase separation and stabilize emulsions. This study demonstrates that colloidal MCC has the same...

The earliest measuring instruments used to evaluate wet and dry coatings were the human eye and hand. Today's instruments do more, do it faster and do it better, but terms such as thumb tack, touch dry and rubout serve to remind us of the old...

Built at a cost of AUD 51 million and brimming with technical innovations, the new 10-story Melbourne City Council building - known as CH2 - has been awarded the first six star design rating from the country's Green Building Council. Because...

For designers, the consumers' affinity for product differentiation is driving color customization in directions never before imagined. Until recently, the cost and logistics of mass color customization made it impractical from an OEM point of view....

As a new and valuable service to our community, we are developing a directory of contact details for the most important paint and coatings manufacturer associations in Asia Pacific from Nepal to New Zealand. In most countries in the region...

The CEPE welcomed some 150 company representatives from the European paint and surface coatings industry to the Cote d'Azur in France, where it held its first annual conference and annual general meeting since restructuring. The small and...

The Italian-based ICA Group, located in Civitanova Marche, Italy, is a specialist in the manufacture of wood coatings. In collaboration with Giardina Officine Aeromeccaniche, it developed coating cycles that make it possible to achieve finishes that...

The growth of powder coatings has been dramatic during the last decade with new applications continually being developed, including plastics. Innovations in processes and materials have opened previously unimaginable opportunities. Although... (1 Member Reaction)

In the last few years, there have been some significant changes in the way companies do business. Gone are the days when business strategies were laid down to produce the same product for ten years. Today, companies do not plan as far ahead. The...

Powder coatings have evolved continuously for more than half a century (or much longer if we include cosmetic applications). The original system in which thermoplastic polyamide or vinyl powders are applied by fluidised bed is now reduced to a niche...

Over the past few decades, the printing industry has undergone a number of developments to existing techniques such as ink-jet and laser printing. Developments have focused on improvements to existing techniques rather than completely new...

This is the beginning of a new series featuring interviews with the global leaders of major paint companies and their suppliers focusing on innovation and trends in the coatings market. We also include some facts about the market in which the company...

This is the second part of our article dedicated to UV-Coating and overprintability, in this part we present four other adhesion phenomena and recommendations of raw material suppliers for the design of overprintable varnishes. The conclusion gives a...

Although (as shown below) there are a vast number of polymers that are collectively known as 'plastics', the majority have common features which make coating difficult. This article reviews some of the applications, problems and ever-improving range...

The development of products is usually conducted on laboratory scale equipment that is similar to that used in the plant. Once the customer accepts the sample, the last formula made is given to the plant to produce. This formulation is transferred to...

When considering coating plastics, the first obvious question pops up. Why bother? By simply using pigmented resin one gets a molded-in color that can't scratch off and one that also eliminates the need for a finishing operation. The answer is...

The emulsion polymerization process has been discussed in a number of publications.1-9 The primary role of surfactants in emulsion polymerization is to lower the interfacial tension, which allows the emulsification of reactive vinyl monomers and the... (1 Member Reaction)

Besides high efficiency, UV stabilizers have to meet some other basic, but most important requirements. To grant such high efficiency, perfect compatibility, that is excellent solubility in the film-forming binder, is a definite must. This requires...

The Overprintability of UV-Coating and Inks is an important issue in the area of packaging and labeling, such applications like, ink printing, hot foil stamping, thermal transfer printing and glue-ability are concerned. UV-Coatings are known to be...

The improvement process adventure starts when your manager walks in and says "we need to - fix the product, increase the yield of, and reduce the cost of. The time table for achieving the assignment is usually now or sooner. If you're lucky you have...

The quest to produce environmentally friendly and low-toxicity coatings has generated many new types of coatings and modifications to existing systems. One broad (if slightly artificial) classification we could apply is that of 'free coatings':...

Coatings manufacturers use various methods for quality assurance/quality control or QA/QC. The devices are simple and low-cost. Data usually consists of one point, giving what essentially is a "go/no-go" test. However, greater competition in the...

This article presents new possible approaches for alkyd resin architecture in order to comply with market constraints related to VOC emissions. Examples and performance of alkyd concepts are presented with regard to VOC content and performance for...

It has been nearly 100 years since large-scale, production-line manufacturing made automobiles affordable for average Americans-and we haven't looked back since. 1. The U.S. interstate system consists of 3.9 million miles of public roads. 2. U.S....

If your car is damaged, you hope that (among other things) the bodyshop will be able to match both the appearance and the durability of the original finish on the repaired areas of bodywork. Yet in vehicle finishing, all the advantages lie with the...

One of the unfortunate consequences of the digital revolution has been the greater ease with which all kinds of printed matter and manufactured goods can be counterfeited, and the greater speed with which international criminal activities can be...

The term 'floor coatings' covers many technologies and applications whose main common property is a requirement for a hard-wearing, abrasion and scuff resistant surface. The primary types of floor which can or must be protected by surface coatings...

To assure continued consumer satisfaction the following stability issues of paint products have to be minimized or avoided: 1. Syneresis - separation of the liquid dispersion media 2. Pigment segregation - change of colour composition inside a...

New pathways were explored to make aqueous polyurethane dispersions without the co-solvent nmethylpyrolidone (NMP). This includes methods to process these materials with alternate cosolvents as well as with co-solvents that can be removed from the...

To design higher performance surface coatings, coating formulators must choose from myriad polymer chemistries. The polymer holds the coating cohesively (internally) together and adhesively (externally) to the substrate to which it is applied. Proper...

Waterborne paints have a long and successful history in certain niche applications (see this month's editorial), but the twin issues of environmental legislation and the low cost of water as a solvent have encouraged their much wider use. Today's...

Most of us have a special "love relationship" with our cars much is to do with their aesthetic appearance. Shape, colour and surfaces contribute to a car's attraction in the show-room. This "love-relationship" with our car is not just for the...

Film defects can ruin protective and aesthetical properties of coatings. A huge amount of time and money is invested in preventing and resolving them. By using knowledge that is simple and available a lot of hustle can be prevented. How to resolve a...

Not too long ago, coatings and their raw materials were produced by a limited range of long-established production methods. But in recent years new technologies have been studied and commercialised which are not merely significant improvements on the...

Coatings have traditionally been based on 'random' polymers, varying statistically in their molecular weight, degree of branching, and in the case of copolymers, the ratio between the different components. In recent years there have been...

Definition of Conductivity Conductivity is the measure of how well a material accommodates the transport of electric charge (conducts an electric current). Units In Ohmic material the resistance R is proportional to the length l of the sample and...

The formulation of wood coatings based on totally VOC-free materials is difficult. When looking for high blocking resistance, we expect a hard binder. Classical binders have a high lowest film-forming temperature (MFFT), and formulations of these...

Coatings on wooden substrates for furniture, flooring and interior are a main application for radiation curing lacquers. Increased adhesion is an important target for development of UV coatings on wood. Superior adhesion leads to better whitening...