| 2010 |
 |
February 9
|
Solving Coating Adhesion Issues
Presented by Jochum Beetsma
This e-Training Course will help attendees achieve faster optimal adhesion performance with their new and existing coating formulations.
Origin of adhesive failure and solutions (pre-treatment, additives...) to improve adhesion properties of waterborne, solvent-based, high-solids, and powder coatings will be covered.
|
Register now
Add to calendar
|
 |
February 24
|
EU Food Contact Regulation: Migration Testing, Declaration of Compliance & Liability Issues
Presented by Rachida Semail & Rob Veraart
Coming Soon!!
|
Register now
Add to calendar
|
 |
February 25
|
High Throughput for Faster Coatings & Inks Developments
Presented by Rogier van Duin
This course provide a practical introduction to High Throughput so as to help attendees make fair judgment whether this technology could be suitable to speed up their own coating and ink developments.
Technology principle, benefits and limits for coating formulations as well as capital and/or training investment will be covered.
|
Register now
Add to calendar
|
 |
March 3
|
The Global Automotive Paint Market: Who is in the Driving Seat?
Presented by Louis McCulloch
Attend this e-Training Course and get an external point of view to enrich your own analysis of the automotive paint market and its players (Size, Drivers, Characteristics, Segmentation, Strategy)
|
Register now
Add to calendar
|
 |
March 17
|
Solving Foaming Issues - Optimal Selection of Defoamers
Presented by Johan Bieleman
This e-Training Course will help coating and inks formulators optimize their system to prevent and solve foaming issues which seriously impact productivity, profitability and final quality.
Defoamer selection, dosage and incorporation conditions will be discussed as part of finding optimal conditions for best performance with minimum undesired side-effect.
|
Register now
Add to calendar
|
 |
March 30
|
Basic Physical Chemistry for Coatings and Inks (Part 1)
Presented by Jochum Beetsma
Attend this e-Training Course and learn about the physico-chemical phenomena that will help you face the the majority of the challenges commonly encountered when formulating, storing and applying coatings and inks.
Applied example on pigment dispersion, dispersion stability, increasing solid content, coalescence etc will be developed.
|
Register now
Add to calendar
|
 |
April 13
|
Basic Physical Chemistry for Coatings and Inks (Part 2)
Presented by Jochum Beetsma
Attend this e-Training Course and learn about the physico-chemical phenomena that will help you face the the majority of the challenges commonly encountered when formulating, storing and applying coatings and inks.
Applied example on pigment dispersion, dispersion stability, increasing solid content, coalescence etc will be developed.
|
Register now
Add to calendar
|
 |
April 20
|
US Patent Claims: How to effectively read them?
Presented by Laurence Pearson
This e-Training Course will help attendees acquire a basic working knowledge on how to read a patent and its claims in order to:
- Adequately use the information to guide product developments
- Generate business sustainability by taking advantage of patentable inventions
- Avoid expenses in terms of law suits or lost business
|
Alert me
Add to calendar
|
 |
April 27
|
Simplifying Formulation for Easier Scale-up
Presented by Girish Malhotra
Attend this e-Training Course and learn about product development strategies that will lead to higher and consistent quality, lower product cost, reduced and lower waste, easier scale-up and simplified manufacturing.
You will come away with innovative ideas to improve your current approach to coating formulation, helping you develop more sustainable products and processes.
|
Alert me
Add to calendar
|
 |
May 27
|
Creative Solutions to Reduce VOC
Presented by Jochum Beetsma
Attend this interactive online course dedicated to solvent-based systems from our independent expert Jochum Beetsma and discover:
How each type of raw material has an influence on rheology
How to lower solvent content while maintaining coating/ink quality
What to focus on during the selection of raw materials for your low-VOC systems
|
Register now
Add to calendar
|
 |
June 24
|
Introduction to Pigment Dispersion & Stabilisation - part 1
Presented by Jochum Beetsma
Introduction to Pigment Dispersion & Stabilisation is a 2-part course. Part 2 is scheduled on July 8.
This online course will provide you with expert insight on pigment dispersion so that you can recognise the causes of problems and become able to work on solving them in an efficient way.
|
Alert me
Add to calendar
|
 |
July 8
|
Introduction to Pigment Dispersion & Stabilisation - part 2
Presented by Jochum Beetsma
This is the second part of Introduction to Pigment Dispersion & Stabilisation. Part one is scheduled on June 24.
This online course will provide you with expert insight on pigment dispersion so that you can recognise the causes of problems and become able to work on solving them in an efficient way.
|
Alert me
Add to calendar
|
 |
September 14
|
Rheology For Competitive Advantage
Presented by Neil Cunningham
The aim of this course is to help you turn your rheometer or viscometer into a tool for gaining a competitive advantage in the marketplace.
You will learn how to use rheological models and "maps" to profile your products, set benchmarks and perform competitor comparisons.
|
Alert me
Add to calendar
|
 |
October 13
|
Introduction to US Patents Claim: FTP Searches & Claim Mapping (Part 1)
Presented by Laurence Pearson
Coming Soon!!
|
Alert me
Add to calendar
|
 |
November 30
|
Coating Film Defects Part-1
Presented by Jochum Beetsma
Save time and money by avoiding and solving faster the film defects of your coatings and inks with this 2-part course presented by our independent expert Jochum Beetsma.
Understand why a solution is effective and why another isn’t by reviewing physico-chemistry that governs film defects
Increase your autonomy and efficiency in developing and adjusting your formulations
Part 2 is scheduled on December 14.
|
Alert me
Add to calendar
|
 |
December 14
|
Coating Film Defects Part-2
Presented by Jochum Beetsma
Save time and money by avoiding and solving faster the film defects of your coatings and inks with this 2-part course presented by our independent expert Jochum Beetsma.
Understand why a solution is effective and why another isn’t by reviewing physico-chemistry that governs film defects
Increase your autonomy and efficiency in developing and adjusting your formulations
Part 1 of this course is scheduled on November 30.
|
Alert me
Add to calendar
|